FAQ

Carrier-grade fiber optic patch cords are widely used in data centers. In recent years, high-density data center fiber optic transmission systems have shown a high-growth trend in bandwidth requirements. Therefore, the use of a new generation of optical fibers and optical modules can continue to explore the growth of optical fiber network bandwidth. potential. Because multi-mode fiber jumpers have great advantages in cost, they have an absolute advantage in data center applications.

Optical fiber is a light transmission medium made by the total reflection of light in glass or plastic fibers. Because of its large frequency, bandwidth, and low loss, it has become the best tool in the field of modern information transmission. In the case of low-loss optical fiber, the microscopic space is only one-tenth of the thickness of the hair. By optimizing the dopant material and changing the waveguide structure, the light will be scattered less and the reflection and transmission will be smoother.

Fiber optic cables are mainly judged from the following aspects: sheath, fiber, reinforced steel wire, steel armor, loose tube, fiber paste, and aramid

Fiber optic cables are divided into single-mode and multi-mode. The single-mode fiber is called single-mode fiber (SMF), and the fiber that supports multiple propagation paths or transverse modes is called multi-mode fiber (MMF). There will be some questions about fiber optic cable single-mode and multi-mode users. Today, Fiber Hope will answer for everyone.

The optical fiber line plays a very important role in our network communication. If the optical fiber line is broken, we will not be able to communicate normally and cannot receive the signal. Then, when the optical fiber cable is broken, how to connect it? Can I connect it by myself?

The tail fiber (the tail fiber), also known as tail line, pigtail line. It has a connector at one end, and a broken end of an optical cable core at the other end, which is connected to other optical cable cores through fusion. In other words, if a jumper is cut from the center into two sections, it becomes two pigtails. Pigtails often appear in fiber optic terminal boxes and are used to connect fiber optic cables and fiber optic transceivers.

As we all know, we use fiber optic cable as a transmission medium when we carry out long-interval data transmission, because it has the characteristics of reliable function, high quality, fast speed, low line loss, and long transmission interval. Because it is a long-interval transmission, generally the optical fiber cable on the land requires a safe operating period of more than 20 years, while the submarine optical cable system requires a higher, 25-year safe operating period.

This requires special equipment to be measured. The outer diameter of the optical fiber cable depends on the diameter of the outer sheath of the optical cable, which can generally be measured with a caliper or a line ruler.

An optical fiber cable is a communication line in which a certain number of optical fibers compose a cable core in a certain manner, and are covered with a sheath, and some are also covered with an outer sheath to realize the transmission of optical signals. Today, Fiber Hope mainly introduces the link method of optical fiber and cable to you.

Fiber pigtails and fiber jumpers, as two commonly used network connection devices in fiber optic networks, have a lot in common, so many people will be confused. In fact, the most intuitive difference between fiber pigtail and fiber jumper is that only one end of the pigtail has a connector, while the fiber jumper has connectors at both ends.

Fiber optic cables are divided into single-mode and multi-mode. The single-mode fiber is called single-mode fiber (SMF), and the fiber that supports multiple propagation paths or transverse modes is called multi-mode fiber (MMF).

With the rapid development of networks in recent years, traditional network connection tools have become increasingly unable to meet people's requirements for network speed.

Commonly used communication optical cables are introduced in two parts: ordinary optical cables and FTTH drop-in optical cables.

The indoor optical cables we usually see generally include the following types: vertical lifting optical cables, single-core and dual-core interconnecting indoor optical cables, optical cables for inflatable environments, and mouse-proof optical cables as follows:

Yes. Typically, Fiber Hope Optical Communication Tech Co.,Ltd. will inform the customer of the volumetric weight of fiber optic patch cord after shipment. Our customers...