News

Optical fiber: shorthand for optical fiber. It is drawn from pure quartz with a special process into a glass tube thinner than a hair with several media in the middle. It is a kind of fiber made of glass or plastic based on the principle of total reflection of light. Achieved light transmission tool. Its brittle texture necessitates an extra layer of protection.

1. The processing after the fault occurs, different types of line faults, the focus of processing is different.

Fiber break, broken fiber is divided into two types: partial interruption and the entire optical cable interruption

Since the customer needs the goods urgently, fiber hope expedited the delivery for the customer overnight, and the goods have been sent out smoothly.

In order to ensure the long-distance and low-loss application characteristics of optical transmission signals, an optical cable line must meet certain physical environmental conditions. Any slight bending deformation or slight pollution of the optical cable will cause the attenuation of the optical signal and even interrupt the communication.

1. How to limit the bending of optical cable? The bending radius of the optical cable is not less than 20 times the outer diameter of the optical cable, and not less than 30 times the outer diameter of the optical cable during construction (non-static).

Thanks to the support of Kyrgyzstan customers, the shipment has been completed!

1. What is the bandwidth of optical fiber related to? The bandwidth of the fiber refers to the modulation frequency when the amplitude of the optical power is 50% or 3dB lower than the amplitude of the zero frequency in the transfer function of the fiber. The bandwidth of an optical fiber is approximately inversely proportional to its length, and the product of the bandwidth length is a constant.

The concept of single-mode and multi-mode is the concept of multi-mode fiber and single-mode fiber propagation mode. The term "mode" is used to describe how an optical signal propagates within the glass core of an optical fiber. In single-mode fiber, light travels along one path; in multimode fiber, light travels in multiple paths.

Q1: What is optical fiber? Is there a difference between optical fiber and fiber optic cable? Answer: Optical fiber is a fine and flexible medium that transmits light beams. It is the abbreviation of optical fiber. The most commonly used product of optical fiber used in integrated wiring is the glass core for light transmission. The core is usually a double-layer concentric cylinder made of quartz glass with a small cross-sectional area, which is brittle and easy to break, so an external protective layer is required. Optical fiber is used in idioms far beyond its own meaning. It can represent either the fiber core, the fiber optic cable, the fiber optic cabling system or even the fiber optic communication system. However, in order to accurately define the products of each part of the optical fiber cabling system, the general optical fiber refers to the core part, and the optical fiber cable is the finished cable composed of the optical fiber as the transmission unit.

What is "counting the east and counting the west"? The National Development and Reform Commission and other departments have jointly issued a document recently, agreeing to start the construction of national computing power hub nodes in Beijing-Tianjin-Hebei, Yangtze River Delta, Guangdong-Hong Kong-Macao Greater Bay Area, Chengdu-Chongqing, Inner Mongolia, Guizhou, Gansu, and Ningxia, and planned 10 countries. data center cluster. So far, the overall layout design of the national integrated big data center system has been completed, and the "East and West" project has been officially launched.

1. What are the dispersions of optical fibers? What is it about? Answer: The dispersion of an optical fiber refers to the expansion of the group delay in a fiber, including modal dispersion, material dispersion and structural dispersion. Depends on the characteristics of both the light source and the fiber.

According to the ever-changing network development trend, there are higher and higher quality requirements for the network cabling in the host room. The huge data processing function requirements of the main engine room also have an updated processing method in the network wiring of the computer room

According to the transmission mode of light in the optical fiber, it can be divided into: single-mode optical fiber and multi-mode optical fiber. There is only one word difference between single-mode and multi-mode, is it just a simple difference in the number of modes? Are there any differences? Below, let's take a look with the Fiber Hope .

The central beam tube (GYXTW) fiber optic cable is the most commonly used.