high tensile strength outdoor fiber cable ideal for networks interconnection

Product Information of Fiber Hope high tensile strength outdoor fiber cable ideal for networks interconnection

Product Details

Fiber Hope Fiber Optic Cable strives excellent quality by attaching great importance to details in the production of optical fiber communication.optical fiber communication, manufactured based on high-quality materials and advanced technology, has reasonable structure, excellent performance, stable quality, and long-lasting durability. It is a reliable product which is widely recognized in the market.

Company Advantages
1. Fiber Hope fiber optic cord has passed various tests. They are the breathability test, down-fiber penetration resistance test, moisture management test, stretch & recovery test, etc.
2. The product features the desired accuracy during operation. It will replicate the exact same task thousands of times with extremely tight tolerance levels.
3. This product adds a sense of style and fashion to the bedroom design, making itself a versatile product for a wide range of occasions.
4. It is widely accepted that Fiber Hope now has gained much popularity since founded for its high quality and reasonable price.

Fiber Hope high tensile strength outdoor fiber cable ideal for networks interconnection-1

Technical Features

The steel strand has a high tensile strength, which is convenient for self bearing overhead laying and lower installation cost; the cable has good mechanical and temperature properties; the loose casing material itself has good hydrolysis resistance and high strength; the inside of the tube is filled with the fiber, and the PE sheath has a good anti UV. External radiation properties; double-sided plastic coated steel strip to improve the resistance to moisture penetration of optical cable.

Fiber Hope high tensile strength outdoor fiber cable ideal for networks interconnection-2

Application Scope

Core network, access network, metropolitan area network, long-distance communication, inter office communication.

Technology Requisition

Fiber core number	OD	weight	Tensile Loading Test		Repeated Bending		Crush Resistance Test
	mm	kg/km	Short-tensile load	Long-tensile load	developments	static	N/100mm2
	mm	kg/km	N	N	mm	mm	N/100mm2
2-30	8.8*15.8	147	3000	1000	20D	10D	1000
32-36	9.1*16.1	154	3000	1000	20D	10D	1000
38-60	9.5*16.5	160	3000	1000	20D	10D	1000
62-72	10.0*17.0	175	3000	1000	20D	10D	1000
74-96	11.2*18.2	200	3000	1000	20D	10D	1000
98-144	13.7*20.7	255	3000	1000	20D	10D	1000

Company Features
1. Fiber Hope seized the favorable opportunity to achieve the rapid growth in the history of outdoor fiber cable industry.
2. We have state-of-the-art manufacturing facilities. They are continuously inspected by our professional engineers, which further assure proper monitoring and control of the manufacturing processes.
3. Our company bears social responsibility. We make efforts to use our combined power of innovation, industry, policy, and people to educate the world and our global stakeholders on reducing waste and pollution. What customers think of us counts most. We'll work hard to improve our abilities, including R&D and manufacturing abilities to cater to clients' requirements. We uphold integrity in the business operation, and we have made it part of our corporate culture. We will protect our stakeholders' privacy and keep our promises. We always stick to the high ethical standards in business dealings. We will make our behaviors in compliance with laws and regulations, and avoid any kind of breaking promises behaviors.

Product Message

*Name

Phone

*E-mail

*Content

Relevant Articles

What are the common questions about fiber optic cables?

1. What is the birefringence of a single-mode fiber?There are two orthogonal polarization modes in a single-mode fiber. When the fiber is not perfectly cylindrically symmetric, the two orthogonal polarization modes do not degenerate. The absolute value of the difference between two orthogonal polarization modes is birefringence.2. What is the most common optical cable structure?There are stranded optical cable, bundled optical cable, skeleton optical cable and ribbon optical cable.3. What are the main components of the optical cable?It is mainly composed of fiber core, fiber paste, sheath material, polybutylene terephthalate and other materials.4. What is the armor of the optical cable?Refers to the protective element (usually steel wire or steel tape) used in special-purpose optical cables (such as submarine cables, etc.), and the armor is attached to the inner sheath of the optical cable.5. What material is used for the cable sheath?Optical cable jackets are usually made of polyethylene (PE) and polyvinyl chloride (PVC) materials, and their role is to protect the cable core from the outside world.6. List the special optical cables used in the power system.Aerial optical cables parallel to power lines are generally referred to as power overhead optical cables. According to the materials used, they can be divided into two categories: metal optical cables and dielectric optical cables. Three additional types. They are optical fiber composite ground wire (OPGW), optical fiber composite phase wire (OPPC), metal self-supporting optical cable (MASS), all-dielectric self-supporting optical cable (ADSS), bundled optical cable (ADL) and winding optical cable (GWWOP). kind.Fiber hope fiber optic cable and patch cord manufacturers can provide high-quality fiber optic cables,fiber pigtails, fiber patch cords, single-mode multi-mode fiber, welcome to inquiry!

What are the common problems of optical cables?

1. What is the blind spot of OTDR? What is the impact on testing? How to deal with the dead zone in the actual test?Typically, a series of blind spots caused by saturation of an OTDR receiver is called a blind spot.The dead zone in the fiber can be divided into the event dead zone and the attenuation dead zone: the distance from the starting point of the reflection peak caused by the interference of the active connector to the receiver saturation peak is called the event dead zone; from the starting point of the reflection peak to the active connector in the fiber The distance from the point at which other events due to interference can be identified is called the attenuation dead zoneFor OTDR, the smaller the dead zone, the better. As the pulse width increases, the dead zone increases. While increasing the pulse width increases the measurement length, it also increases the measurement dead zone. Therefore, when testing optical fibers, narrow pulses should be used for the measurement of the OTDR and its adjacent event points, and wide pulses should be used for the measurement of the far end of the optical fiber.2. Can OTDR measure different types of fibers?If a single-mode OTDR module is used to measure a multi-mode fiber, or a multi-mode OTDR module is used to measure a single-mode fiber with a core diameter of 62.5mm, the measurement results of the fiber length are not affected, but the results such as fiber loss, optical connector loss and return loss Incorrect. Therefore, when measuring optical fibers, it is necessary to select an OTDR that matches the measured optical fiber for measurement, so as to obtain the correct results of various performance indicators.3. What does "1310nm" or "1550nm" mean in ordinary optical test instruments?It refers to the wavelength of an optical signal. The wavelength range of optical fiber communication is in the near-infrared region, with wavelengths between 800nm and 1700nm. It is usually divided into short-band and long-band, the former refers to the 850nm wavelength, and the latter refers to the 1310nm and 1550nm wavelengths.4. Which wavelength of light has the least chromatic dispersion in current commercial fibers? What wavelength has the least loss of light?The 1310nm wavelength has the smallest optical dispersion and the 1550nm wavelength has the smallest optical loss.5. How to classify the fiber according to the change of the refractive index of the fiber core?Divided into stepped fibers and gradient fibers. The stepped fiber has a narrow bandwidth and is suitable for short-distance communication with small capacity; the tapered fiber has a wide bandwidth and is suitable for large and medium-capacity communication.6. How to classify fibers according to the different modes of light wave transmission in fibers?Divided into single-mode fiber and multi-mode fiber. The core diameter of a single-mode fiber is about 1-10 μM, and at a given wavelength, only one fundamental mode is transmitted, which is suitable for large-capacity long-distance communication systems. Multimode fiber can transmit multimode light waves, and its core diameter is about 50-60 μM, and its transmission performance is worse than that of single mode fiber. When transmitting the current differential protection of multiple protection, multi-mode optical fiber is used between the photoelectric conversion device in the communication room of the substation and the protection device in the main control room.7. What is the meaning of numerical aperture (NA) of step index fiber?The Numerical Aperture (NA) represents the light-gathering ability of the fiber. The larger the NA, the stronger the light-gathering ability of the fiber.Fiber hope fiber optic cable and patch cord manufacturers can provide high-quality fiber optic cables, fiber pigtails, fiber patch cords, single-mode multi-mode fiber, welcome to inquiry!

Thanks to the support of Kyrgyzstan customers, the shipment has been completed!

Thanks to the support of Kyrgyzstan customers, the shipment has been completed!Fiber hope fiber optic cable and patch cord manufacturers can provide high-quality fiber optic cables, fiber pigtails, fiber patch cords, single-mode multi-mode fiber, welcome to inquiry!

Basic knowledge and common problems of optical fibers and cables

1. What is the bandwidth of optical fiber related to?The bandwidth of the fiber refers to the modulation frequency when the amplitude of the optical power is 50% or 3dB lower than the amplitude of the zero frequency in the transfer function of the fiber. The bandwidth of an optical fiber is approximately inversely proportional to its length, and the product of the bandwidth length is a constant.2. What is the dispersion of optical fibers?Different frequency components or different mode components of the optical signal (pulse) transmitted in the fiber propagate at different speeds, and will inevitably produce signal distortion (pulse broadening) after reaching a certain distance. The generation of optical fiber dispersion is based on two factors. One is that the optical signal entering the optical fiber is not monochromatic light (the light emitted by the light source is not monochromatic or the modulated signal has a certain bandwidth); the other is the dispersion effect of the optical fiber on the optical signal. .3. How to describe the dispersion characteristics of signal propagation in optical fibers?It can be described by pulse broadening, fiber bandwidth and fiber dispersion coefficient.4. What is the cutoff wavelength?It means that a single-mode fiber usually has a certain wavelength. When the transmitted light wavelength exceeds this wavelength, the fiber can only propagate light in one mode (fundamental mode), and under this wavelength, the fiber can propagate multiple modes ( light containing higher-order modes).5. What effect does the dispersion of optical fiber have on the performance of optical fiber communication system?The dispersion of the fiber will broaden the transmission of the light pulse in the fiber. Affects bit error rate, transmission distance and system rate.6. What is backscatter?Backscattering is a method of measuring attenuation along the length of the fiber. Most of the optical power in the fiber is forward propagating, but there is also a small amount of optical power that is scattered back toward the illuminator. The time curve of backscattering can be observed using a beamsplitter. Starting at one end, it is possible to measure not only the length and attenuation of a uniform fiber, but also local irregularities, breaks and optical power loss at splices and connectors.7. What is the testing principle of OTDR? What is the function?OTDR is made according to the principle of backscattering and Fresnel reflection of light. It uses the backscattered light that is produced when light propagates in an optical fiber to obtain attenuation information. It can be used to measure the attenuation of the fiber, splice loss, the location of the fiber failure point, and understand the loss distribution along the fiber length. It is an indispensable tool in fiber optic cable construction, maintenance and monitoring. Its main parameters include: dynamic range, sensitivity, resolution, measurement time and dead zone.Fiber hope fiber optic cable and patch cord manufacturers can provide high-quality fiber optic cables,fiber pigtails, fiber patch cords, single-mode multi-mode fiber, welcome to inquiry!