48F MTP OM1 Breakout Patchcord MTP Patch Cord Manufacturer

Drawing

product-Fiber Hope-img

Description

2.0mm singlemode 48F MTP harness is mainly installed in the MTP fiber optic cassette, panels or backbone trunk assemblies with the active equipment ports, saving costly data centre rack space and easing fibre management. Senko brand Standard Loss MTP connector piece parts and ferrule ensure the good optical performance, and at the same time it is cost-effective. Every MTP connector of ORC is 100% tested under the 3D interferometer equipment with traceable data.

Application

◆ 40/100G Optical Modules Connectivity

◆ Data Center Cabling

◆ FTTH/FTTA

◆ Cassettes And Rack mount

◆ Telecommunication Network

Features

◆ Polarity options are TIA style A, B, or C (Method B is standard)

◆ Fan-out fibers from MPO/MTP connectors into individual simplex or duplex

◆ Customized for length, staggering, connector type, breakout style, fiber count, and labeling

◆ Available in OS1/2, OM2, OM3 and OM4

◆ Available in FC,LC, SC, ST, MU, and MTP

◆ Fast to upgrade and reduce installation time

Technology Requisition

1. Operating & Storage Temperature

	Parameters	Min	Max	Unit
1	Operating Temperature	-40	70	°C
2	Storage Temperature	-40	70	°C

2. Optical Performance

Item		Parameters
MPO/MTP® Connector		SM(1310nm/1550nm)		MM(850nm)
		Standard	Low Loss	Standard	Low Loss
Insertion Loss	Typical	0.5dB	0.2dB	0.5dB	0.2dB
	Maximum	0.7dB	0.35dB	0.7dB	0.35dB
Return Loss		>=60dB for APC		--
		>=40dB for PC		>=20dB for PC
Male/Female		Male: with Pin; Female: without Pin

LC/FC/SC Connector
Item	SM		MM
	1310nm/1550nm IL(dB)	1310nm/1550nm RL(dB)	850nm IL(dB)	850nm RL(dB)
PC	<=0.2	>=50	<=0.3	>=25
APC	<=0.3	>=60	N/A	N/A

3. Geometry Parameters

MT
Measurement			Pass/Fail Limits
Parameters			Min	Max

Radius of Curvature	Long Axel		2000mm	∞
	Short Axel		50mm	∞
Angle	Long Axel		-0.2°	0.2°
	Short Axel	APC	7.8°	8.2°
		PC	-0.2°	0.2°
Fiber Height			1000nm	3000nm
Different Fiber Height			N/A	500nm
Adjacent Fiber Height			N/A	300nm
Ferrule Length			7.9mm	N/A

FC/LC/SC UPC
Item	Pass/Fail
Parameters	Min	Max
FC ROC	10.00mm	25.00mm
LC ROC	7.00mm	25.00mm
Fiber Height	-100.00nm	50.00nm
Apex Offset	0.00μm	50.00μm

FC/SC/LC APC
Item	Pass/Fail
Parameters	Min	Max
ROC	5.0mm	12.00mm
Fiber Height	-100.0nm	50.0nm
Apex Offset	0.00μm	50.00μm
APC Angle	7.700deg	8.300deg
Key Error	-0.500deg	0.500deg